Conveyor belt hinge plates

A special form of hinge plates are conveyor belt hinge plates. We are specialized in the production of endless belt hinge plates (not in segments).

Close tolerances and a project-based approach are the requirements that customers place on us. The conveyor belt hinge plates can be produced in both steel and stainless steel. In addition, the links can be provided with a perforation of your choice.

conveyor belt hinge plate

A selection from our lookbook

Conveyor belt hinge plates for the food industry

Are you looking for custom made conveyor belt hinge plates? We produce conveyor belt hinge plates for various applications, entirely customer-specific.

Conveyor belts for the food industry are very diverse. Each conveyor belt has to comply with different product specific characteristics, such as food safety standards, cleaning and temperature differences of the products. We have therefore developed special hinge plates, constructed with our conveyor belt hinge plates in one piece, for a width of more than 2000 mm. No other supports are required than on the sides. We have also built belts to filter contaminants of 1mm in size.

All our models are custom made specifically for your project.

Knuckle

The hinge knuckle is the circular part. Also called bead or loop. The knuckles of the two different clasps usually alternate around the pen.

1 of 10
Pin

The pin connects the two (or more) hinge leafs.

2 of 10

The pin diameter determines the thickness of the pin, measured in diameter.

3 of 10
Leaf

The leaf or blade of the hinge is the rotating or fixed part of a hinge.

4 of 10

The leaf width is the distance from the end of the leaf to the center of the pin.

5 of 10

The leaf thickness is the thickness of the hinge.

6 of 10

The hinge width is the total width of the open hinge: measured at right angles to the pin. 

7 of 10

The knuckle length is the length from one end to the other end of a single knuckle, parallel to the pin. Usually this is a fixed size, e.g. 30mm, 25mm, 20mm, etc.

8 of 10

The end play is the light axial movement between the knots over the axis of the pen. This is caused by the small space between the nodes, which causes the leaf to hinge.

9 of 10

The hinge length is the total length of the hinge measured over the leaf parallel to the pin.

10 of 10

HUGO TE BRAKE

Commercial Advisor

Need support?

We are happy to help you. Send a message via the chat pop-up or call or email us for more information and advice.